Copiers & Printers

How to Fix “No AirPrint Printers Found” on iPhone, iPad & Mac

How to Fix “No AirPrint Printers Found” on iPhone, iPad & Mac

“No AirPrint Printers Found” means your iPhone, iPad or Mac searched the network and no printer answered. In most cases the printer is fine. The usual causes are that your device and the printer are on different networks, the printer is asleep or has dropped off Wi-Fi, or the network is blocking the discovery traffic AirPrint relies on. Work through the fixes below in order. Most people are printing again by step 3.

No AirPrint Printers Found message on an iPhone

Quick fixes (try these first)

  1. Put both devices on the same Wi-Fi network. On your iPhone or iPad, open Settings > Wi-Fi and note the network name. On the printer, print a network configuration page (usually under Settings or Network on the control panel) and check that it shows the same network. A phone on the guest network or on cellular data will never see an office printer.
  2. Wake the printer up. Many printers drop off Wi-Fi in deep sleep. Press any button or tap the screen, wait 30 seconds, then try again.
  3. Restart all three: printer, router and phone. Turn the printer off for 10 seconds, unplug the router for 30 seconds, then restart your iPhone or iPad. This clears stale network addresses, the single most common cause of the error.
  4. Move closer. If the printer sits at the edge of your Wi-Fi coverage, discovery can fail even when printing used to work. Test with the phone in the same room as the printer.
  5. Turn off your VPN. A VPN on the phone sends traffic away from your local network, so it cannot find a printer sitting a few feet away. Turn it off, print, then turn it back on.

Why AirPrint can’t find your printer

AirPrint uses a discovery protocol Apple calls Bonjour (also known as mDNS). When you tap Print, your device sends a small broadcast on the local network asking “which printers are here?” and lists every printer that replies. The error appears when nothing replies. That happens for a handful of reasons:

Cause How to spot it Fix
Different networks Phone on guest Wi-Fi, cellular, or a different office network Join the same network as the printer
Printer offline or asleep Wi-Fi light off or blinking; network page shows no IP address Wake it, reconnect it to Wi-Fi
Bonjour/AirPrint disabled on the printer Printer is on the network and other computers can print to it Turn on AirPrint or Bonjour in the printer’s web settings
Network blocks discovery Works at home but not in the office, or only on one floor Ask IT about client isolation, VLANs or a Bonjour gateway
Printer not AirPrint compatible Older or budget model, no AirPrint logo Use the manufacturer’s app instead
Outdated software Problem started after a long gap without updates Update iOS/iPadOS and the printer firmware

Step-by-step fixes when the basics don’t work

1. Confirm the printer supports AirPrint

Look for the AirPrint logo on the box or in the spec sheet, or search your model on Apple’s list of AirPrint-enabled printers. Most HP, Canon, Brother, Epson, Xerox, Lexmark and Sharp printers made in the last decade support it, but some entry-level and older models do not.

2. Turn on AirPrint and Bonjour in the printer’s settings

Some printers ship with AirPrint switched off, and a firmware update or factory reset can turn it off again. Type the printer’s IP address (from the network configuration page) into a browser to open its built-in web settings, then look for:

  • HP: Network or Networking tab > AirPrint, and make sure AirPrint and Bonjour are enabled.
  • Canon: Network settings > Bonjour, set to On.
  • Brother: Network > Protocol, check that AirPrint and Bonjour are ticked.
  • Epson: Network Settings > Bonjour or AirPrint Setup, set to enabled.
  • Office copiers (Xerox, Sharp, Lexmark, Ricoh and others): AirPrint, Mopria and Bonjour usually sit under the network or protocol settings and may require an administrator login.

IPP (Internet Printing Protocol) also needs to be enabled, since AirPrint prints over it.

3. Reconnect the printer to Wi-Fi

Use the printer’s control panel or its app (HP Smart, Canon PRINT, Brother Mobile Connect or Epson Smart Panel) to run the wireless setup again. Pick the same network your phone uses and re-enter the password carefully. If the printer has an Ethernet port and sits near the router, a cable is the most reliable fix of all.

Checking Wi-Fi connectivity between a printer and an iPhone

4. Update iOS, iPadOS and the printer firmware

On your iPhone or iPad go to Settings > General > Software Update. For the printer, check for firmware in its control panel, its web settings or the manufacturer’s app. Firmware updates often fix discovery bugs with newer Apple software.

5. Reset network settings on your iPhone or iPad

If one device can’t find the printer but others can, reset that device’s network settings: Settings > General > Transfer or Reset iPhone (or iPad) > Reset > Reset Network Settings. This forgets saved Wi-Fi networks, so have the password ready.

6. Reset the printer’s network settings

As a last step on the printer side, restore its network settings to default (usually Settings > Network > Restore or Reset), then set up Wi-Fi from scratch. Make sure AirPrint and Bonjour are still on afterward.

AirPrint problems in an office network

If AirPrint works at home but not at work, the network is almost always the reason. Business networks are built for security, and several common settings stop Bonjour from reaching the printer:

  • Guest Wi-Fi and client isolation. Guest networks deliberately stop devices from seeing each other, printers included.
  • Separate VLANs or subnets. When phones, laptops and printers sit on different network segments, discovery broadcasts don’t cross between them.
  • Mesh systems and managed access points. Some filter multicast traffic by default.

The fix is a network change, not a phone setting: your IT team can enable a Bonjour or mDNS gateway on the router or access points, or place printers where staff devices can reach them. On a Mac, you can also add the printer directly by IP address (System Settings > Printers & Scanners > Add Printer > IP tab, protocol IPP), which skips discovery entirely. If you’d rather not manage this at all, a managed print service handles printer setup, mobile printing and network configuration for you.

Advanced AirPrint troubleshooting on an office network

Fixes for specific printer brands

HP printers

Open the HP Smart app to confirm the printer is online and on the right network. If it shows as offline, run the app’s diagnostics. In the printer’s web settings (type its IP address into a browser), check that AirPrint is enabled. If the printer is in HP’s Wi-Fi Direct mode, connect it to your normal Wi-Fi network instead.

Canon printers

Canon PIXMA and MAXIFY models sometimes reconnect in access point mode after a reset. Use the Canon PRINT app or the control panel to join your Wi-Fi network, and confirm Bonjour is on in the network settings.

Brother and Epson printers

Both brands keep AirPrint and Bonjour settings in their web-based management page. After a firmware update, re-check that these are still enabled.

How to print without AirPrint

If your printer doesn’t support AirPrint, or you need to print right now, use the manufacturer’s app: HP Smart, Canon PRINT, Brother Mobile Connect or Epson Smart Panel all print directly from an iPhone or iPad. You can also email the document to a computer connected to the printer. (Google Cloud Print, often recommended in older guides, was shut down in 2020.) For more options, see our guide to printing from your phone.

Frequently asked questions

What does “No AirPrint Printers Found” mean?

It means your Apple device searched the local network and no AirPrint printer responded. The printer may be off, asleep, on a different network, or blocked from being discovered. It does not usually mean the printer is broken.

Why does my iPhone say no AirPrint printers found when the printer is on?

Being powered on is not the same as being on the network. Print a network configuration page and confirm the printer has an IP address on the same Wi-Fi network as your iPhone. If it does, check that AirPrint and Bonjour are enabled in the printer’s settings.

Why can my iPad find the printer at home but not at the office?

Office networks often use guest Wi-Fi, client isolation or separate VLANs that stop discovery traffic. Ask your IT team to allow Bonjour (mDNS) between staff devices and printers.

Does it matter if the printer is on 2.4 GHz and my phone is on 5 GHz?

Usually not, as long as both bands belong to the same network. It only causes problems when the router treats the bands as separate networks, which some older routers do. If in doubt, connect both devices to the same band to test.

How do I know if my printer supports AirPrint?

Check the box or spec sheet for the AirPrint logo, or search for your model on Apple’s AirPrint list. If it isn’t listed, use the manufacturer’s printing app instead.

Still not printing?

If you’ve worked through every step and your office printers still won’t show up, the problem is most likely in the network or the printer configuration. Titan’s certified technicians set up and support copiers and printers for businesses across North Carolina, South Carolina and Virginia, including mobile and AirPrint printing, with a guaranteed 4-hour onsite response. Request service or get a free assessment of your print setup.

Editorial Team

Titan Office Solutions helps businesses across North Carolina and Virginia lease, service, and get more out of their office technology. Questions? Call (704) 741-0821 or request a free assessment.

Ready for office technology that just works?

Get a free, no-obligation assessment and written quote within 24 hours.